• Your one-stop destination for all your HVAC/R needs. Partner with the power of Danfoss
  • 82+ years of experience in providing energy efficient and reliable solutions for refrigeration and air conditioning.
TGE SERIES EXPANSION VALVES (R22, R134a, R407 & R410a)
HOT GAS BYPASS REGULATORS (TUH TYPE)
TE 5 – TE 55 & T2 SERIES EXPANSION VALVES
ELECTRONIC EXPANSION VALVES ETS SERIES
HOT GAS BYPASS REGULATORS (KVC/CPCE+LG TYPE)
FILTER DRIERS
STOP VALVES (GBC/BML)
SIGHT GLASSES
CARTRIDGE PRESSURE SWITCH TYPE ACB AND CCB
NRV CHECK VALVE
BRAZED & MICRO PLATE HEAT EXCHANGERS
CABLE Ecflex EFET 330 Ecfast (Cable Strapping)
ERC 213
PACK CONTROLLERS AK PC 530
CASE COLD ROOM CONTROLLES AK CC 550
MCX PROGRAMMABLE CONTROLS
MCHE (LLA/E-COATING
KP PRESSURE SWITCHES
KP THERMOSTAT
KPS 47
KPS 79 TEMP. SWITCH
SOLENOID VALVES (EVR Series)
  • Solutions and products
  • for ammonia refrigeration
  • We have more than 60 years of experience producing products for Ammonia Refrigeration and we focus on our core business of making quality products that enhance performance and reduce total life cycle costs – the key to major savings. All products from Danfoss are tried and tested for many years and proven to be a very reliable choice.
STOP VALVES (SVA/STC)
STRAINER (FIA)
CHECK VALVES (CHV-X) AND STOP CHECK VALVES (SCA-X)
CHECK VALVES (IN-LINE)
SOLENOID VALVES (WELDABLE)
DOUBLE STOP VALVES, DSV
PILOT VALVES
ICS SERVO VALVE (BACK PRESSURE VALVE)
QUICK CLOSING DRAIN VALVE(QDV)
ELECTRONIC LEVEL SWITCHES(LLS 4000)
LIQUID LEVEL CONTROLLER (AKS 4100.EKE 347)
MOTOR VALVES AND ACTUATORS (ICM AND ICAD)
ICLX VALVE (DN32-150) EKE 400 EVAPORATORS CONTROLLER (HOT GAS DEFROST SOLUTION)
VALVE STATION (ICF)
ICFD DEFROST MODULE
GAS DETECTOR SENSOR NH3/CO2/HFC
    • Sensing Automation Controls
SOLENOID VALVES (EV220A)
THERMOSTAT SENSOR MBT 3270
PRESSURE TRANSMITER MBS 3000 AND 3050
MBT
SOLENOID VALVE EV 220 S
PRESSURE TRANSMITER DST P140
PRESSURE TRANSMITER MBS 1600 AND 1650
DST P110 PRESSURE SENSOR
AV210 ANGLE SEAT VALVES
AVTA THERMOSTATIC VALVES FOR INDUSTRIAL COOLING
CS PRESSURE SWITCHES FOR AIR AND WATER
EV220B 65/80 2/2 SOLENOID VALVES
    • Compressor & Condesnsing Unit
VZH INVERTER SCROLL COMPRESSORS
MT/MTZ & NTZ RECIPROCATING COMPRESSORS
MLZ/ MLM/ LLZ SCROLL COMPRESSORS
SH/ SM/ SY/ SZ-S SERIES SCROLL COMPRESSORS
DSH COMPRESSORS
HUWAEI FHP COMPRESSORS
TURBOCOR OIL FREE COMPRESSORS
ROTARY  COMPRESSORS WITH NATURAL REFRIGERANTS
OPTYMA CONDENSING UNITS
    • NeoCharge Take The Shortcut To Low-Charge

A plug-and-play system
for easy installation

Application

NeoCharge can be applied to both Nh3 and Co2 air coolers.
It is easy to mount on bottom-, top-, or side-fed systems
and is suitable for stainless steel pipes as well as
carbon-steel galvanized pipes.

Signal required

Minimum signal required is Cooling ON, OFF and defrost
ON/OFF (in existing system).

Defrost in new systems

In new systems, the EKE450 NeoController can manage
defrost in addition to injection control.

    • Efficient Frost Protection Solutions For Reliable Cold Room Operations

Cold Storage

Cold Storage

    • A world of heat exchangers Optimized heat transfer solutions for every application
TRADITIONAL PLATE HEAT EXCHANGERS
Features and benefits
  • Experience the benefit of a heat transfer solution that perfectly matches your requirements and lowers your energy consumption.
  • High performance and a low pressure drop eliminate unnecessary burdens on your system and optimize overall system performance.
  • The design results in a compact solution with a small footprint, simple installation, and easy access for maintenance.
FREE FLOW PLATE HEAT EXCHANGERS
Features and benefits
  • Gentle treatment and even distribution of the media provide the highest possible product output quality.
  • High heat transfer efficiency and extended intervals between cleaning ensure operation for an entire campaign with minimum downtime and maximum value for money.
  • Large plate gap designed to counteract fouling with sizeable plate channels and no stagnant zones.
SEMI-WELDED PLATE HEAT EXCHANGERS
Features and benefits
  • High efficiency means that fewer plates are needed for high performance and consequently lowers the hold-up volume. Fewer plates also lowers the cost of each heat exchanger, as an added bonus.
  • Engineered to use smaller amounts of potentially hazardous media, the SONDEX® semi-welded range is a safe and responsible choice for demanding duties.
    • STL Family – continuous innovation and proven design
SSTC – STOP VALVES
SFIA – FILTERS
SREG – REGULATING AND EXPANSION VALVES
SSCA – STOP CHECK VALVE
SCHV – CHECK VALVES
SNV NIDDLE VALVE
SNV-ST NIDDLE VALVE
    • Intelligent Purging System (IPS 8) AMMONIA

Advanced air purger solution for
industrial refrigeration

The new Danfoss Intelligent Purger System (IPS) is an automatic,
self-contained operating unit that helps remove non-condensable gases
in a safe and energy-efficient way. This helps maintain optimum
refrigeration capacity and system efficiency, allowing professionals
to achieve maximum system performance.

Danfoss Product

Technical Data
Supply voltage 230V AC, 1ph, 50Hz
Current 3.7 A
Power consumption 1.3 kW
Ambient temp, operation -10°C to +43°C (14°F to 109°F)
Ambient temp, transport -30°C to 55°C (-22°F to 131°F)
Enclosure IP55
Weight 90 kg (199 lbs)
Dimensions (L×W×H) 1051 x 441 x 703 mm (41.4 x 17.4 x 27.7 inches)
Purger refrigerant R452A 900gram (1 lbs 15.75 oz)
System refrigerant R717 minimum 6 bar (87 psi)
Max operating pressure (R717) 40 bar (580 psi)
Operating temperature (R717) -40°C to +60°C (-40°F to +140°F)

Technical Deep Dive Quantify your NCG problem


1°C higher condensing temperature leads to:

  • 3% lower COP
  • 3% higher power consumption
  • 1% lower cooling capacity

Example:

Power consumption of higher stage compressors = 300 kW
Compressor running time per year = 5000 hrs
Measured Subcooling = 5 K
Cost of energy = INR 10 /kWh
Annual kWh of higher stage compressors with NCGs = 1500000 kWh
Annual kWh expenses = 15 Cr
Estimated increase in condensing temperature = 2 K
Estimated % increase in kWh/year = 6%
Annual extra kWh consumption due to NCGs = 90000 kWh
Annual savings installing IPS 8 = 9 Lac (Approx)

Benefits of the Danfoss IPS 8

Easy installation and maintenance

  • Cost-effective design with few mechanical and electrical connection interfaces
  • Minimizes the risk of leakage thanks to the fully brazed internal cooling system
  • Plug and play, stand-alone unit eases installation and commissioning – low risk of potential error
  • No need for advanced settings
  • Easy to handle with its compact design
  • Fast and easy pump down before service

Maximize system performance

  • Automatic purging response to non-condensable gases in the refrigeration system
  • Constant high pressure differential pressure between refrigerant and purger refrigerant independent of system suction or condensing pressure
  • Reduction of plant power consumption
  • 8 point purger functionality

Improve operational safety

  • Electronic purging helps reduce the risk of refrigerant release to the environment
  • Self-contained operating unit functions independently from the main plant
  • Easy monitoring of past purging cycles data with operation log
  • Self-diagnostics for unit and system operation to shut down in case of malfunction of air purger components

BRANDS